QMI-NETWORK(1)                                            User Commands                                            QMI-NETWORK(1)

NAME
       qmi-network - Simple network management of QMI devices

SYNOPSIS
       qmi-network [OPTIONS] [DEVICE] [COMMAND]

DESCRIPTION
       Simple network management of QMI devices

   Commands:
       start  Start network connection

       stop   Stop network connection

       status Query network connection status

OPTIONS
       --profile=[PATH]
              Use the profile in the specified path

       --help Show help options

       --version
              Show version

       Notes:

              1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:

              /dev/cdc-wdm0

              2) The qmi-network script requires a profile to work. Unless explicitly specified with `--profile', the file is as‐
              sumed to be available in the following path:

              /etc/qmi-network.conf

              3)  The  APN  to use should be configured in the profile, in the following way (e.g. assuming APN is called 'inter‐
              net'):

              APN=internet

              4) Optional APN user/password strings may be given in the following way:

              APN_USER=user APN_PASS=password

              5) Optional IP_TYPE strings may be given in the following way:

              IP_TYPE=[4|6]

              6) If you want to instruct the qmi-network script to use the qmi-proxy setup, you can do so by configuring the fol‐
              lowing line in the profile:

              PROXY=yes

              7) To instruct the qmi-network script to use an already existing Profile ID, or to create a new one on the fly, use
              the following configuration in the profile:

       PROFILE=number
              # to use the profile-id number

       PROFILE=auto
              # to create a temporary profile on the fly

              8) Once the qmi-network script reports a successful connection you still need to run a DHCP client on  the  associ‐
              ated WWAN network interface.

COPYRIGHT
       Copyright © 2013-2021 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
       This is free software: you are free to change and redistribute it.  There is NO WARRANTY, to the extent permitted by law.

SEE ALSO
       The  full documentation for qmi-network is maintained as a Texinfo manual.  If the info and qmi-network programs are prop‐
       erly installed at your site, the command

              info qmi-network

       should give you access to the complete manual.

qmi-network 1.35.2                                          March 2024                                             QMI-NETWORK(1)